Two common installation methods of automatic license plate recognition system

The application of the license plate recognition system makes the parking management more convenient and succinct. What are the two common installation ways of the license plate recognition system. 1. Straights installation: The straight lane is an ideal installation environment for obtaining high quality photographs of the vehicle as it enters the identification area. 1 The car park license plate recognition system and the road gate can be installed on the same side of the driveway, but the car park license plate recognition system should be installed in front of the road gate at a distance of not less than 30 cm to prevent the mutual interference between the equipment. 2 when using snap recognition and video recognition, the distance between sensor coil and car license plate recognition system is 4M. 3 when video plus ground sensing pattern is used, the distance between ground sensing coil and car license plate recognition system is 3m. 2, Wide Lane Installation 1 if the lane is extra wide and the direction of movement of the vehicle is not fixed, when the vehicle enters, the front of the vehicle will be left and right askew, which simply affects the identification function, can the lane dividend two may use cone bucket, road piles and other obstacles to block off a non-motor lane, so that the motor lane narrow, the direction of traffic. 2 if the lane is wide but can not be divided into two lanes or non-motorized lanes, a dual camera can be installed and a car park license plate recognition system can be installed on each side of the lane, regardless of the direction of travel, has a camera that can pick up the license plate and recognize it. 3 if the lane is very short and the car is coming from a certain direction, the car body is generally inclined to one side. This condition allows the camera to be mounted on the leaning side of the front of the car so that the front of the car is facing the parking lot plate recognition camera, if the vehicle is coming from two directions, a dual camera can be installed, and each parking lot LPR camera takes a picture of the incoming vehicle in one direction.